4) interface specifications, 5) clock and backup memory specifications, 1 specifications – Epson FEH300b User Manual
Page 17
2-3
2-1 Specifications
(4) Interface specifications
Item
Specifications
D-sub 9-pin (CN1)
Applicable
standards
RS-232C, RS-422/485
Synchronization
Asynchronous type
Data length
7- or 8-bit
Parity
None, odd, even
Stop bit
1- or 2-bit
Baud rate
4800, 9600, 19200, 38400, 57600, 76800, 115.2kbps
(187500 bps for MPI connection
(Note))
Applications
PLC, temperature controller, barcode reader, etc.
Modular jack 8-pin
(MJ1/MJ2)
Applicable
standards
RS-232C, RS-485 (2-wire connection)
Applications
Screen data transfer (MJ1), PLC, temperature controller, CREC, barcode reader,
V-I/O, Multi-link 2, V-Link, etc.
USB connector
(USB-A/B)
Applicable
standards
Compliant with USB version 1.1
Baud rate
Low speed: 1.5 Mbps, full speed: 12 Mbps
Applications Printer (EPSON PM series), CF card reader/writer
Applicable
standards
Compliant with USB version 1.1
Baud rate
Low speed: 1.5 Mbps, full speed: 12 Mbps
Applications Screen data transfer, PictBridge-compatible printer
Ethernet port
100BASE-TX/
10BASE-T
(LAN)
Applicable
standards
Compliant with IEEE802.3u (100BASE-TX), IEEE802.3 (10BASE-T)
Baud rate
100 Mbps, 10 Mbps
Recommended
cable
100
Ω
UTP (unshielded twist-pair cable), category 5, max. 100 m long
Applications
PLC connection, etc.
CF card interface
Compliant with CompactFlash
TM
Extensional communication port
(CN5)
Controller unit connection
(The communication unit is not connectable.)
Optional unit port (CN7)
RGB input/output, video, sound
(The optional unit "GU-xx" is necessary.)
Note) For details, refer to the User’s Manual
(5) Clock and backup memory specifications
Item
Specifications
Battery specification
Coin-type lithium primary cell
Backup memory
SRAM 512 kbytes
Backup period
Approx. 5 years (Ambient temperature at 25 °C)
Battery voltage drop detection
Provided (Internal memory of $s167 allocated)
Calendar accuracy
Monthly deviation ±90 s (Ambient temperature at 25 °C)
(Note)
Note) Time loss is approximately 90 seconds a month in an ambient temperature of 25
°
C in the non-energized state
(backup with battery). Depending on the ambient temperature, the calendar may lose 356 seconds or advance
189 seconds in a month at the maximum. Correct the clock periodically.
USB-A
USB-B