4 system composition – Epson FEH300b User Manual

Page 13

1-5

1-4 System Composition

The following illustration shows the system composition of @E.Terminal for MC.

@E.Terminal for MC

Screen editor
"V-SFT-5"
(V5.3.0.0 or later)

SX bus

Ethernet/RS-232C or RS-485

LAN/CN1/MJ1/MJ2

USB-B

MJ1/MJ2

External PG
(only No. 1 axis)

[No. 1 axis]
SX bus station No.: "201"

[No. 2 axis]
SX bus station No.: "202"

[No. 8 axis]
SX bus station No.: "208"

FALDIC ALPHA5
FALDIC -

"V-CP"

Up to 8 servos and I/O terminals each
can be connected.

SX bus station No.: "221"

SX bus station No.: "228"

I/O terminal
Input 8 points/
Output 8 points
(NR1SW-16T65DT)

Starting up signal etc.

RDY etc.

Programming support tool
SX-Programmer Standard
"NP4H-SWN" (V2.3.5.1 or later)
SX-Programmer Expert (D300win)
"NP4H-SEDBV3" (V3.4.4.0 or later)

"NW0H-CNV + NW0H-CA3"

commercially available USB cable

PLC/general purpose
computer

Note) Connectable servo amplifier

FALDIC-

(RYS***S3-VSS, RYS***M3-VSK)

FALDIC ALPHA5 (RYT*** 5-VS )