Printer commands chapter 5 – Epson 410 User Manual

Page 62

Printer Commands

Chapter 5

))))))))))))))))))))))))))))))))))))))))))))

410 Operators Manual

control codes) and will print a label as soon as the number of strings equals the
amount specified by the ^D64 command. At this point, the printer will print a label
and continue to accept data. This mode is useful for interfacing to a device that
transmits raw data, such as a scale or meter.

This is an example of the D63, 64 and 65 Commands...

^A0^D64

^D57

12,640,400,,20,36,,1,412

1,320,270,3,7,1,,4,205,3,,,1,1

1,35,325,10,1,6,,,,2

2,320,325,20,1,10,,4

3,320,305,25,1,10,,4
4,320,285,25,1,10,,4

5,35,250,10,1,6,,,,2

6,230,355,30,1,12

7,75,133,29,1,13

7,320,185,20,16,2,,4,2,50,2

8,75,089,29,1,13

9,75,045,29,1,13

10,75,001,29,1,13

^D56

^D2

SHIP FROM:

MICROCOM CORPORATION

8333-A GREEN MEADOWS DR., N.
WESTERVILLE, OH 43081

SHIP TO:

Order No: XXX

77777777777777777777777777777777777777

88888888888888888888888888888888888888

99999999999999999999999999999999999999

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

^A3^D63

^A5^D64

^A6^D61

;clear any old settings

;load new format mode

;header

;field info

;field info
;field info

;field info

;select RAM format

;begin text entry mode

;data line 01 (protected)

;data line 02 (protected)

;data line 03 (protected)
;data line 04 (protected)

;data line 05 (protected)

;data line 06

;data line 07

;data line 08

;data line 09

;data line 10

;enable auto print and clear text

;tell printer to print after 6 (CR)

;tell printer to start new data entry

at data line 6 instead of 1