Epson 410 User Manual

Page 57

Chapter 5

Printer Commands

))))))))))))))))))))))))))))))))))))))))))))

410 Operators Manual

variable data as normal. It may be the difference between sending a few lines of data
versus the entire format! Access is very fast.

To list a file that has previously been sent to the printer, use the ^AX^D54 command,
where ^AX denotes the file to be read. The printer will send the file to the serial port.

Sample files: File #1 initiates the save format file memory and downloads saved format
file #1. File #1 includes all the fixed data on the label. File #2 is the file that initiates
processing of file #1 and includes all variable data for the format. File #2 also prints the
label. File #3 shows how a second saved format would look if the entire format was in
one file.

NOTE: = 1B hex or ESC character

File #1

^A66^D66

;Remember, send this string first time.

^A1^D59
^D57
4,288,193,5,19,30,0,1,148
1,100,20,10,1,10,0,2,1,1,,1
1,210,20,7,1,10,0,2,2,2,,11
1,152,154,12,12,,0,2,2,100,,18
1,130,54,12,32,,0,2,2,2,,18
^D56
^D2

File #2

^A1^D58
24 PRINTS $ 3.79 20496340379
^D3