Epson 410 - Manual (Page 100)

Printer Commands Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual 94
XX 76 Load Delay Time Between Labels: Preceded by ^A which contains the wait in
1/10ths of a second. Maximum value is 650.
80 Clears Commands 86, 88, 89.
81 Disable Serial Number Function: Will disable either single or multiple serial
number commands.
XX 84 Load Text String Number to increment/decrement: Tells the printer which
text string number to increment or decrement. For single serial numbers. Section
5.3.8.
XX 85 Load increment/decrement step value: This is the value that the single serial
number is incremented or decremented.
86 Single Serial Number Status:
0 Disable increment and decrement.
1 Enable increment. The serial number will be incremented by the value from ^D85.
2 Enable Decrement. The serial number will be decremented by the value from
^D85.
XX 87 Load Field Number to Clear Increment/Decrement Status: Clear the status
of one or more serial numbers with this command.
XX 88 Load Field Number to Increment by 1: For multiple serial numbers.
XX 89 Load Field Number to Decrement by 1: For multiple serial numbers.
XX 91 Load Value for Printer to See Valid Gap. Section 5.3.
93 Load Control Code Recognition Status:
0 Enable control code recognition.
1 Disable control code recognition.
XX 95 Load User Defined Steps for Label to Advance:
XX 96 Load Advance Delay: ^A specifies how many milliseconds to delay
repositioning of the label in tag/tear and peel-and-dispense modes.