Efficient Networks SpeedStream 5100 Series - Manual (Page 50)

SpeedStream Router User Guide
42
6. Click OK to proceed.
The file is sent to the router. If a valid
update file, the router writes the update to
its internal flash memory. The System
Reboot screen displays a countdown
during the Flash Write process. When the
update is completed, the Login screen
displays.
To cancel the reset:
• Continue depressing the Reset button for longer than 10 seconds. The pwr LED will return to green,
and the action will be cancelled.
Diagnostics
Note This option may not be available on your router configuration.
The Diagnostics screen allows you to test your DSL service.
1. From the main menu, click
Diagnostics.
The Diagnostics screen displays.
2. Click Run Diagnostics at the bottom
of the screen.
The test results display under the
Results column.
3. If a test displays a FAIL status, click
Run Diagnostics again to confirm the
failure.
4. If the test still displays a FAIL status,
check all connections and passwords;
then click Run Diagnostics again.
For failures of Connections at the
Carrier, Independent Service
Provider, or Internet Connectivity
contact your Service Provider.
5. For tests other than those mentioned
above, if no change in status after
running the diagnostics a second time,
contact your Service Provider for
further assistance.