Emerson Radio PD5802 - Manual (Page 7)

6
INSTALLING THE REMOTE CONTROL BATTERIES
1.) Press down on the locking “OPEN” tab and remove the battery door.
2.) Insert two “AAA” batteries (not included) in the compartment. Follow the polarity
markings engraved inside the compartment. If the batteries are inserted
incorrectly the remote control will not work.
3.) Replace the battery door.
Notes: Use a well-known brand of alkaline batteries for longest life and best
performance. When the remote operation becomes intermittent replace both
batteries at the same time. Do not mix different types of batteries, such as alkaline
and carbon zinc batteries.
OPEN
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture.
(Follow battery manufacturer’s directions.)
PD5802_ib031803.p65 18/3/2003, 11:06 6