Emerson Radio PD5802 - Manual (Page 26)

2 5
CD CASSETTE SYNCHRO RECORDING
When recording from CD to cassette, the CD cassette synchro recording feature in
this unit allows you to start both the CD player and the cassette recorder with the
push of a single button.
1.) Open the CD door and place the CD to be recorded in the CD player as usual.
Close the CD door.
2.) Open the cassette compartment and insert a blank cassette tape.
3.) Press the FUNCTION button to select the CD mode.
4.) Press the cassette Record key. The
SYNC indicator appears in the display.
The cassette recorder and the CD player
will start simutaneously and all of the
material on your CD will be recorder
directly onto the blank cassette.
Note: If a CD is already playing and you press the cassette Record key,,
the CD player will back up to the beginning of the track being played and
cassette will begin recording at that point automatically.
Automatic Recording Volume Level Control
This unit has an Automatic Level Control (ALC) circuit which controls the recording
volume level and prevents overloaded and distorted recordings. The VOLUME,
EQ, DBBS control has no effect on recording volume level. You may change the
controls setting during the recording or even reduce the volume level to “Minimum”.
This will not effect the level of the recording.
STEREO HEADPHONE JACK
Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the
PHONES jack (located at back cabinet) for private listening without disturbing others.
Before putting on the headphones reduce the VOLUME control to a low level, then
put the headphones on and gradually increase the VOLUME control to a comfortable
listening level. The built in speakers are automatically disconnected when
headphones are connected to the headphone jack.
SYNC
PD5802_ib031803.p65 18/3/2003, 11:06 25