Emerson Radio PD5802 - Manual (Page 22)

2 1
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP button to stop playback before you begin the programming
steps below.
1.) Press the FUNCTION button to select CD, insert your disc in the player, close
the door, and wait until the total track number appears in the display.
2.) Press the PROGRAM/TIME ADJ button
once. The PROG Indicator flashes and
program mem ory “P-01”, Track “01”
appears in the display.
3.) Use the / buttons to select the first
track to be programmed.
(Example: Track 08).
4.) When track number “08” appears in the display, press the PROGRAM/TIME
ADJ button once again to enter the track
“08” in program memory number “01”. The
track number returns to “00” and the
program memory advances to “P-02”
indicating that you may now select a track
to be entered in program memory number “02”.
5.) Use the or buttons to select the next track to be programmed. When
the desired track number appears in the display press the PROGRAM/TIME
ADJ button again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
7.) To begin programmed playback press the
PLAY/PAUSE button. The display will
show the first programmed track and
playback will begin on that track. The PROG
Indicator stops flashing and remains in the display.
PROG
PROG
PROG
PROG
PD5802_ib031803.p65 18/3/2003, 11:06 21