Playing cassette tapes – Emerson Radio PD5802 User Manual

Page 24

2 3

PLAYING CASSETTE TAPES

1.) Press the FUNCTION button to select TAPE

mode. The display shows correct time and the

TAPE indicator appears.

2.) Open the cassette door by pressing the Stop/Eject

key..

3.) Place a pre-recorded cassette tape into the slots on the inside of the door with

the exposed tape facing up and the full reel on the right side. Close the cassette

door.

4.) Press the cassette Play

key to begin playback.

5.) Adjust the VOLUME, EQ and DBBS controls as desired.

6.) To advance the tape rapidly press the F. Fwd

key. When you reach the

desired point press the Stop/Eject

key..

7.) To rewind the tape rapidly press the Rewind

key. When you reach the

desired point press the Stop/Eject

key..

8.) When the tape ends the Automatic Stop System releases the Play

key and

shuts off the tape motor. You may then open the cassette door, remove your

tape, turn it over and play the other side if desired.

9.) When you are finished listening press the Stop/Eject

key to stop the tape,

open the door, remove the tape and close the door. If you are playing a tape

and then change to the RADIO or CD function be sure to press the Stop/Eject

key to disengage the tape mechanism. This prevents excess wear and

tear on the mechanism.

IMPORTANT:

Always press the Stop/Eject

key to shut off the tape motor before opening the

cassette door to remove your tape. The Automatic Stop System does not function

in the F. Fwd

and Rewind

modes. When the tape ends in the F. Fwd

and

Rewind

modes the motor continues to run. You must press the Stop/Eject

key to shut off the motor before opening the door to remove your tape.

PD5802_ib031803.p65

18/3/2003, 11:06