Adjusting the image shape – Epson 7850p User Manual

Page 37

Using the Remote Control

Adjusting the Image Shape

Even if your projected image has no parallel sides, you can correct the
problem with Quick Corner. Follow these steps:

1. Press the

button on the remote control (or on the

projector’s control panel).

2. Select the

Setting

menu and press

Enter

3. From the Setting menu, select

Keystone

and press

Enter

4. Select

Quick Corner

and press

Enter

You see this screen:

5. Press the

Enter

button to select the corner you want to adjust.

6. Use the

pointer button on the remote control (or the arrow

buttons on the projector) to adjust the shape.

7. Repeat steps 5 and 6 as needed to adjust any remaining corners.

8. When done, press the

ESC

button on the remote control or

projector’s control panel to exit the menu system.

Quick Corner

remains selected in the Keystone menu, the Quick

Corner screen appears whenever you press the projector’s

Keystone

buttons. You can then follow steps 5 through 8 above to correct the
shape of your image, or press

ESC

to exit Quick Corner.

note

For more information on
using the menu system, see
Chapter 6.

[

]:Adjust

Adjust

[ ] :Move next

[ ] :Move next
[ESC]

[ESC]

:Return (Press 1 second to

reset)

note

If you are not satisfied with
the corrections made, press
the

ESC

button for one

second to reset the screen to
its original shape.