Monitoring your projectors – Epson 7850p User Manual
Page 147
Managing Projectors
147
You see the status of each of your registered projectors on the main
EMP Monitor screen:
Monitoring Your Projectors
The EMP Monitor screen lets you monitor your projectors using the
Status, Video Source, and Error icons shown below. These let you see
which projectors are currently being used, from which source (or port)
they are projecting an image, and if a problem occurs.
For detailed status information, select the projector in question and
click
View details
.
note
To monitor a projector
when it’s in standby mode
(plugged in but not turned
on), you must select
Network ON
as the
Standby Mode
setting in
the projector’s menu system
(see page 138).
Remember that when
Standby Mode is set to
Network ON
, the exhaust
fan continues to operate
after the projector has cooled
down. This is normal.
Status icon
Video Source
icon
Error icon