Elmo HV-8000SX - Manual (Page 31)

- 30 -
Powered Manual Focus
To focus on specific part of the material,
such as 3-D material. Press the focus
button [NEAR] or [FAR] on the
operation panel or the focus button
[FOCUS NEAR] or [FOCUS FAR] on
the wireless remote control.
Note: The auto focus functions up to
approx. 10cm (3.9 in.) above the
stage surface (with the close-up
lens attached). FOCUS NEAR FOCUS FAR
TELE WIDE ZOOM
Operation panel
Wireless remote control
1. How to move
When the move button [MOVE] on the wireless remote control is pressed, the
Presenter is set to the preset status.
2. How to preset
When the preset button [PRESET] on the wireless remote control is pressed, the
current status of the Presenter is saved.
IRIS CLOSE MOVE
Wireless remote control
The Presenter has a function of saving its
operation status (Preset).The preset
function is read with the move button
[MOVE] on the wireless remote control.
The operation status that can be saved
includes:
• Preset zoom angle of view
• Adjustment status of AUTO iris level
• White balance status
• ON/OFF of apreture
• Status of gamma
• Lighting status
• Microphone level
About the preset and move operation