Elmo HV-8000SX - Manual (Page 30)

- 29 -
FOCUS NEAR FOCUS FAR
TELE WIDE ZOOM
Operation panel
Wireless remote control
Focus
Auto Focus
Press the auto focus button [AUTO
FOCUS] on the front panel or the auto
focus button [AF] on the wireless remote
control, and the auto-focus will be
activated.
While the auto-focus is in operation, the
indicator lamp on the front panel blinks
until the object is brought into focus.
The Presenter features a one-push auto
focus function. Once focusing is
completed, the auto focus function is
released, and the focused position
maintains unchanged (FOCUSFREE).
To obtain sharper image, zoom in on the
object by pressing the zoom button
[TELE] on the front panel or wireless
remote control and press the auto-focus
botton.
However, the objects listed below may
not be brought into focus in the auto
focus mode. In these cases, use the
manual focus mode.
INPUT AF
Front panel
Wireless remote control
TELE WIDE ZOOM
Front panel
Wireless remote control
If the focus button [NEAR] or [FAR] on
the front panel or the focus button
[FOCUS NEAR] or [FOCUS FAR] on
the wireless remote control is pressed
during the auto focus, the auto focus will
be released.
Note: The auto focus function works
up to a height of approx. 10cm
(3.9 in) above the stage surface
when the zoom button [TELE] is
set to the maximum.
• Objects bearing little contrast
• Objects with fine repeated patterns, such as lateral stripes and cross stripes
• Objects glittering or reflecting strong light
• Objects with bright background, or excessive contrast
• Objects in a dark picture plane
• Objects located near and far away at the same time
• Objects in motion