Elmo HV-8000SX - Manual (Page 23)

- 22 -
The respective images from two different
sources such as a PC and an Elmo
Presenter "HV-100XG" can be alternately
presented on a TV by selecting the source
by pressing the desired input selection
buttons without changing the cable
connections. The input can be switched
by pressing the input select button
[RGB1] or [RGB2] on the operation
panel or the input select button [INPUT]
on the wireless remote control. The
lighting of the indicator lamp indicates
which input is now selected.
Every time the input selection button
[INPUT] on the wireless remote control
is pressed, input is switched in a cycle of
the
Main RGB1 RGB2.
Input selection is possible as shown in the
following table:
INPUT AF
Operation panel
Wireless remote control
Input selection
TELE WIDE ZOOM
Front panel
Wireless remote control
TELE WIDE ZOOM
Front panel
Zoom
Wireless remote control
Press the zoom button [TELE] on the
front panel or wireless remote control,
and the image will gradually be enlarged.
Press the zoom button [WIDE] on the
front panel or
wireless remote control, and the image
will gradually be reduced.