Elmo HV-8000SX - Manual (Page 12)

- 11 -
0
A
SXGA
Key alignment and functions:
XGA
NTSC
PAL
Over scan
Under scan
Normal operation
Initialization
B C D
1
DIP Switch The functions can be switched as follows:
[A] key: To switch the resolution of video output through the RGB-out terminal [RGB OUT].
. SXGA . XGA
[B] key: To switch the TV output.
. NTSC . PAL
[C] key: To switch the screen size of the TV output.
. Over scan . Under scan
[D] key: To initialize the setting of the network function to its factory setting.
. Normal operation . Initialization
45.
Name Function
Video-in
Terminal 1 Video signal from this terminal is output through the analogue
RGB-out terminal when the input selection is set at RGB1.
Video-in
Terminal 2 Video signal from this terminal is output through the analogue
RGB-out terminal when the input selection is set at RGB2.
Audio-in
Terminal 1 Audio signal from this terminal is output through the audio-out
terminal when the input selection is set at RGB1.
Audio-in
Terminal 2 Audio signal from this terminal is output through the audio-out
terminal when the input selection is set at RGB2.
P.22, P23
P.22, P23
P.22, P23
P.22, P23
41.
42.
43.
44.
Reference
Page
Note: Before switching the DIP switch key, be sure to turn OFF the power supply to
the Presenter.