beautypg.com

Ice service, Turning your ice maker on, Turning your ice maker off – Electrolux 241857202 User Manual

Page 14: Ice production: what to expect, Caution, Important

background image

14

ICE SERVICE

If your refrigerator has an automatic ice maker,

it will provide a sufficient supply of ice for

normal use. During the initial startup of your

refrigerator, no ice will be produced during the

first 24 hours of operation. Air in new plumbing

lines may cause the ice maker to cycle two or

three times before making a full tray of ice.

With no usage, it will take approximately one

to two days to fill the ice container.
New plumbing connections may cause the first

production of ice cubes to be discolored or

have an odd flavor. Discard ice made during

the first 24 hours.

TURNING YOUR ICE MAKER ON

After the plumbing connections have been

completed, the water supply valve must be

opened. Place the ice container under the

ice maker, pushing it as far back as possible.

Lower the wire signal arm to its “down” or ON

position.

TURNING YOUR ICE MAKER OFF

To stop the ice maker, lift the wire signal

arm until it clicks and locks in the “up” or

OFF position. The ice maker also turns off

automatically when the ice container is full.

If your model has an adjustable freezer shelf,

place the shelf in the lower position, so that

the wire signal arm will hit the ice when the

container is full.

ON

OFF

Wire

Signal Arm

ICE PRODUCTION: WHAT TO

EXPECT

The ice maker will produce 2.5 to 3 pounds

of ice every 24 hours depending on usage

conditions. Ice is produced at a rate of 8 cubes

every 75 to 160 minutes.

NOTE

Automatic ice makers are also optional

accessories that may be installed in most

models at any time. Call your local dealer for

information.

CAUTION

Chemicals from a malfunctioning softener

can damage the ice maker. If the ice maker

is connected to soft water, ensure that the

softener is maintained and working properly.

IMPORTANT

Your ice maker is shipped from the factory

with the wire signal arm in the ON position.

To ensure proper function of your ice maker,

hook up water supply immediately or turn

ice maker OFF by lifting the wire signal arm

until it clicks and locks in the UP position.

If the ice maker is not turned off and

the water supply is not connected,

the water valve will make a loud

chattering noise.

CAUTION

DO NOT place the ice container in your

dishwasher.