Epson TM-S1000 - Manual (Page 27)

Chapter 1 Product Overview
27
1
Error Status
There are two possible error types: recoverable errors and unrecoverable errors.
Recoverable Errors
Processing is no longer possible when recoverable errors occur. They can be recovered easily by
turning the power off and then on again or sending an error recovery command from the driver
after eliminating the cause of the error.
Error Error description
Error LED flash code
Recovery measure
Mechanism
position error
When any of the
following errors occurs
during the initialization
and operation.
• Error detected during
hopper position
detection operation.
• Error detected during
franker position
detection operation.
• Error detected during
pocket switch board
position detection
operation.
Remove the cause
(foreign matter or
papers) and call
BiCancelError of the
TM-S1000 API or turn
off/on the power.
Approx.320 ms
Approx.5120ms