Canon PIXMA TS202 Inkjet Printer - Manual (Page 159)

Prevention of Print Data Loss
You can reduce the size of the print data that was created with the application software and then print
the data.
Depending on the application software being used, the image data may be cut off or may not be
printed properly. In such cases, select
On . If you will not be using this function, select Off .
Important
• When using this function, the print quality may drop depending on the print data.
Unit of Print Data Processing
Selects the processing unit of the print data to be sent to the printer.
Select
Recommended under normal circumstances.
Important
• A large amount of memory may be used for certain settings.
Do not change the setting if your computer has a small amount of memory.
Note
• Unit of Print Data Processing tab cannot be used with the XPS printer driver.
Print With
Specify the FINE cartridge to be used from the installed FINE cartridges.
Select from
All Colors (Default) , Color Only , Black Only .
Important
• When the following settings are specified, Black Only does not function because the printer
uses the color FINE cartridge to print documents.
• Other than Plain Paper , Ink Jet Hagaki (A) , Hagaki K (A) , Hagaki (A) , or Hagaki is
selected for Media Type on the Main tab
• Borderless is selected from the Page Layout list on the Page Setup tab
• Do not detach the FINE cartridge that is not in use. Printing cannot be performed while either
FINE cartridge is detached.
Stamp/Background (Stamp...) dialog box
The Stamp/Background ( Stamp... ) dialog box allows you to print a stamp and/or background over or
behind the document pages. In addition to the pre-registered ones, you can register and use your original
stamp or background.
Note
• With the XPS printer driver, the Stamp/Background... button has become the Stamp... button and
only the stamp function can be used.
Stamp
Stamp printing is a function that prints a stamp over a document.
Check this check box and select a title from the list to print a stamp.
Define Stamp...
Opens the Stamp Settings dialog box .
You can check the details of a selected stamp or save a new stamp.
159