Irc-6 infrared remote control, Irc-6 operation, Operation irc-6 infrared remote control – CHAUVET DJ Swarm Wash FX ILS Derby, Wash, Laser, Strobe, Multi-Effects Fixture User Manual
Page 25
Page 18 of 125
Swarm Wash FX ILS User Manual Rev. 5
Operation
IRC-6 Infrared Remote Control
The Swarm Wash FX ILS can be operated with the CHAUVET IRC-6. To enable IR wireless control, follow
the instructions below.
1. Press
repeatedly until
SEt
shows on the display.
2. Press
.
3. Use
or
to select from
on
or
oFF
.
4. Press
.
IRC-6 Operation
Automatic Mode
To turn on automatic mode with the IRC-6:
1. Press
on the IRC-6.
2. Press
<+>
or
<–>
to select the program (see
).
To adjust the speed of the automatic program:
1. Press
on the IRC-6.
2. Press
<+>
or
<–>
to increase or decrease the speed.
Sound-Active Mode
To turn on sound-active mode with the IRC-6:
1. Press
on the IRC-6.
2. Press
<+>
or
<–>
to select the program (see
).
Manual Control
To toggle which effects are active:
•
Press
<1>
to toggle the wash.
•
Press
<2>
to toggle the swarm effect.
•
Press
<3>
to toggle the laser.
•
Press
<4>
to toggle the SMD strobes.
Black Out
To black out the product with the IRC-6:
1. Press
on the IRC-6.
This will turn off all the LEDs until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
product does not respond when a button is pressed, try pressing
.
Black Out may have been activated.
The buttons on the IRC-6 not listed above are reserved for future use.
BLACK
OUT
AUTO
SOUND
SENSI-
TIVITY
SPEED
STROBE
%
MANUAL
FADE
R
G
B
W
UV
A
+
0
-
1
2
3
6
5
4
7
8
9