D-fi usb connectivity, D-fi usb compatibility, Configuration (d-fi usb) – CHAUVET DJ Swarm Wash FX ILS Derby, Wash, Laser, Strobe, Multi-Effects Fixture User Manual
Page 20: D-fi usb dip switch channels, Operation
Page 13 of 125
Operation
Swarm Wash FX ILS User Manual Rev. 5
D-Fi USB Connectivity
The Swarm Wash FX ILS is able to become a D-Fi wireless receiver/transmitter with the use of the D-Fi
USB from Chauvet DJ. Simply set the product's DMX Personality and DMX Address, set the DIP switch D-
Fi receiving/transmitting channel, then plug it into the D-Fi USB port.
D-Fi USB Compatibility
The D-Fi USB can receive a DMX signal from the D-Fi Hub and the FlareCON Air 2 as well as other D-Fi
USB products.
Configuration (D-Fi USB)
1. Set the DMX Personality and DMX address on the Swarm Wash FX ILS.
2. Use the Chart provided to set
BOTH
:
•
the Channel, and then
•
The Receiving or Transmitting option
NOTE: DIP Switch 5 is for Transmitting OR Receiving, please choose carefully.
D-Fi USB DIP Switch Channels
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port. Doing so may
cause damage to the product.
Once plugged in, the D-Fi USB will take over the product. Wired DMX and manual display
control / menu buttons will be unavailable until you unplug the D-Fi USB. The priority
levels are:
1. D-Fi USB
2. Wired DMX
3. Manual Digital Display/Menu Buttons
Ch. 1
2
3
4 T/R Ch. 1
2
3
4 T/R Ch. 1
2
3
4 T/R Ch. 1
2
3
4 T/R
1
9
1
9
2
10
2
10
3
11
3
11
4
12
4
12
5
13
5
13
6
14
6
14
7
15
7
15
8
16
8
16
Receiving
Receiving
Transmitting
Transmitting