EverFocus SPEED DOME EPTZ1000 - Manual (Page 12)

2-11
2. EPTZ1000INSTALLATION
2.1. Packing List
There are 3 boxes that are housing, bulb and mechanical part with a camera module, one
wall mount bracket, one power adapter and one accessory packet in the package. The
detail accessories list below:
¾ Housing x1
¾ Bulb x1
¾ Mechanical part with a camera module x1
¾ Wall mount bracket x1
¾ Adapter x1
¾ Accessory
packet
— Glove
x2
— M5 Hex Allen wrench x1
— Pin connector x1
— M5 screw (Hex) x3 for wall mount bracket fixing
— M3 screw x3 for bulb fixing
— Anchor nut and wall mount screw x4
2.2. Cable Needed
- Power Cable
An adapter with 24V AC/3.5A output provides the power to the speed dome. An
extension power line may be needed.
Note: The input AC voltage range of an adapter depends on different area.
Please make sure the voltage range before installing.