Epson 61p - Manual (Page 37)

Projecting 37
Adjusting the Height of Your Image
If the image is too low, you can raise it by extending the projector’s
front adjustable foot.
1. Stand behind the projector. Press up on the blue foot release
lever and lift the front of the projector to extend the front
adjustable foot.
2. Once the image is positioned where you want, release the lever to
lock the foot in position.
3. To fine-tune the height of the image,
rotate the feet at the back of the
projector.
If the image is no longer rectangular after
raising it, see the next section.
Foot