Playing cassette tapes – Emerson Radio PD3812 User Manual
Page 21
2 0
Playing Cassette Tapes
1.) Press the POWER button to turn on. Press the FUNCTION button to select the
TAPE mode.
The correct time appears in display.
2.) Open the cassette door by pressing the STOP/EJECT
key..
3.) Place a pre-recorded cassette tape into the slots on the inside of the door with
the exposed tape facing up and the full reel on the right side.
Close the cassette door.
4.) Press the cassette PLAY
key to begin playback.
5.) Adjust the VOLUME and BASS BOOST controls as desired.
6.) To advance the tape rapidly press the F.FWD
key. To stop the tape before it
ends press the STOP/EJECT
key..
7.) To rewind the tape rapidly press the REWIND
key. To stop the tape before
it ends press the STOP/EJECT
key..
8.) When the tape ends the Automatic Stop System releases the PLAY
key and
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
PD3812_B032305.p65
23/3/2005, 15:02
20