Emerson Radio PD3812 - Manual (Page 14)

1 3
AUTO PRESET Function
This model includes an Auto-Preset feature which you can use to automatically
enter 10 strong FM and AM stations in the tuner preset memory.
Note: This feature is useful if you live in a rural area with a limited number
of stations. However if you live in a major metropolitan area with many
strong stations, do not use the Auto-Preset feature. It will memorize the
first 10 strong stations it encounters and these will probably not be the
same 10 stations that you would select if you were memorizing stations
manually.
To use the Auto-Preset feature, turn the unit 'On', select the Tuner function and the
desired band.
Depress and hold the “CLOCK/MEMORY/AUTO PRESET” button until the tuner
display begins to move, then release the button.
The tuner will start searching up the band and it will automatically enter the first 10
strong stations on the selected band in the 10 preset memories. The display will
indicate which station is being entered in each of the 10 memories.
After the Auto-Preset feature memorizes 10 stations, the tuner returns to preset
memory number 1.
Recalling Preset Stations
Turn the unit ‘On’ and select the desired band.
Press the PLAY MODE/M-UP button on the top panel repeatedly to scroll through
the preset memories until the display shows the desired station.
Changing Preset Stations
To change any preset station memory select the desired band and tune to the new
station you wish to memorize.
Press the CLOCK/MEMORY/AUTO PRESET button and then press the PLAY
MODE/M-UP buttons to display the channel number you wish to change.
Press the CLOCK/MEMORY/AUTO PRESET button again to enter the new station
in the memory. The new station is memorized and the previous station is deleted
from the memory.
PD3812_B032305.p65 23/3/2005, 15:02 13