Emerson Radio PD3812 - Manual (Page 11)

1 0
Listening To The Radio
1.) Press the POWER button on the top panel to turn the unit “On”.
If necessary, press the FUNCTION button to
select the Radio mode.
The main display turns on and shows
FM 87.5 MHz.
2.) Press the STOP/BAND button to select a
different radio band.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the or buttons on the top panel until the frequency of
the desired station appears on the display.
• Automatic Tuning
Press and hold the or buttons on the top panel until the display begins
to move, then release the buttons. The tuner will search up or down the band
for the next strong station and stop on that station.
Repeat this procedure until the tuner stops on your desired station.
4.) If you tuned to an FM Stereo station the
“STEREO” indicator will appear in the display.
5.) Adjust the VOLUME UP or DOWN and BASS BOOST controls as desired.
6.) When you are finished listening press the POWER button to return to the
Standby (Power Off) mode.
The display shows the correct time.
PD3812_B032305.p65 23/3/2005, 15:02 10