Emerson Radio PD3812 - Manual (Page 20)

1 9
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
When the memory is full, the “ – – ” indicator
flashes in the display.
7.) To begin programmed playback press the PLAY/PAUSE button.
The display will show the first programmed track and playback will begin on
that track.
The MEMORY indicator remains “On”.
After the last programmed track has played the player stops but the programmed
tracks remain in the memory.
To play the programmed tracks again, press the CLOCK/MEMORY/AUTO PRESET
button and then the PLAY/PAUSE button.
To cancel the programmed sequence from memory, press the STOP/BAND
button at programming mode, or open the CD door.
Programmed Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks.
• First, program the desired tracks according to Steps 1 through 7 on page 18.
• When Programmed Playback begins, press the PLAY MODE/M-UP button twice
to activate the All Tracks Repeat feature.
• The REPEAT indicator appears in display and
all the tracks in your programmed sequence will
be repeated continuously.
To cancel Programmed Repeat Playback press the STOP/BAND button until
both the MEMORY and REPEAT indicators go ‘Off’.
PD3812_B032305.p65 23/3/2005, 15:02 19