Emerson Radio PD3812 - Manual (Page 10)

9
OPERATING INSTRUCTIONS
Setting The Clock
Note: The clock can only be set at TAPE mode, or when power is ‘Off’.
1.) Press the CLOCK/MEMORY/AUTO PRESET button on the top panel.
“12 H” will begin flashing in the display indicating that the clock is set for
“American” 12-hour time.
Press either the or button on the top panel to change the clock format
to “European” 24-Hour time if desired.
The display will change from “12H” to “24H”.
2.) Press the CLOCK/MEMORY/AUTO PRESET
button. The Hour digits will begin flashing.
3.) Press the or buttons to set the display to the correct Hour, , AM or PM.
4.) Press the CLOCK/MEMORY/AUTO PRESET
button again. The Minute digits will begin
flashing.
5.) Press the or buttons to set the display to the correct Minute.
6.) Press the CLOCK/MEMORY/AUTO PRESET
button once more.
The colon “ : ” begins flashing and the clock
starts to run.
Notes: The correct time will always appear on the display in TAPE mode and
when power is ‘Off’.
PD3812_B032305.p65 23/3/2005, 15:02 9