Epson C82315 User Manual

Page 20

Command

Number

Parameters Name/Description

Command

Examples

Control paper size selection (laser printers only)

Makes paper size settings

Feeds paper size selected by the host
computer

Feeds any paper size

Feeds A4 size paper

&%Z05,01

&%Z05,02

&%Z05,03

Select alternate command-pass-thru delimeter

Selects the characters that both begin and end

the command-pass-thru feature. You can select

any two characters, as long as the first is not an

ampersand (a). The default value is the &%

characters.
xx

Selects the two characters represented
by the XX characters.

&%Z06,*!

Select print-complete handling

Tells the interface when to send a print-com-

plete signal. (Check your self test results to see

lf your printer supports true print complete.)

Selects early print-complete handling

&%Z07,1

(all data has been sent to printer’s

buffer, but printer may still be printing)

Selects true print-complete handling

&%Z07,2

(all data has been sent to printer, and

printer has finished printing)

Set printer sharing timeout period

Sets the amount of time (in seconds) the printer

waits for additional data before switching

between the twin-axial host system and the PC

system connected to the auto-sharing/parallel

connector (8 seconds is the default). If your

printer supports intelligent emulation switching

(IES) make sure your printer’s IES timeout
period is less than this setting.

x x

Selects a waiting period of XX seconds

&%Z08,05

Parallel port initialization string

Defines a string of characters that is sent to the
printer when the parallel port is activated (up to
25 characters can be included in the string)