Eagle Electronics FishElite - Manual (Page 124)

116
You must enter which way you want to transfer data, from an MMC
card to the unit (load) or from the unit to an MMC card (save).
GPS data automatically recorded in the unit's internal memory must be
saved to the MMC (as a GPS Data File) in order to store it on your per-
sonal computer. GPS Data Files stored on an MMC must be copied from
the card to the unit's internal memory before the unit can read them.
1. Insert the MMC into your unit. Press MENU | MENU |
↓ to
S
YSTEM
S ETUP
| ENT |
↓ to
T RANSFER M Y D ATA
| ENT .
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must insert a card
into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press ENT (for S AVE
.)
To transfer data from the MMC to the unit: press
→ to
L
OAD
| ENT .
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press
↓ to
S AVE D ATA
| ENT . If you want to rename the file (as
shown in the following figures), press ENT to activate the selection box.
Press
↑ ↓ to change the first character, then press → to the next char-
acter and repeat until the name is correct. Then press ENT |
↓ to
S
AVE
D
ATA
| ENT .
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press
EXIT .