beautypg.com

Navigating trails – Eagle Electronics FishElite User Manual

Page 120

background image

112

To turn off trail display:
1. Press

MENU

|

MENU

|

↓ to

M

Y

T

RAILS

|

ENT

.

2. Press

↓ to enter the Saved Trail list, then use ↑ ↓ to select the de-

sired Trail Name|

ENT

.

3. Press

↓ → to

V

ISIBLE

|

ENT

. To return to the previous page, press

EXIT

repeatedly. Repeat the steps above to the turn on the trail display.

Navigating Trails

There are three methods for following a trail: visual trailing, navigating
a trail and backtracking a trail. Try each method to see which you pre-
fer.

Visual trailing is the simplest method. It uses only the Map Page and
requires no menu commands at all. The technique works the same if
you are running a trail forward (from start to end) or backward (from
end to start.) Visual trailing, however, provides no navigation informa-
tion during the trip, like time to your destination.

The other two methods provide a full range of navigation data and work
with both the Map Page and Navigation Page. The only difference be-
tween them is navigating a trail follows a trail forward while back-
tracking follows a trail in reverse.

When hiking at walking speed with a hand-held GPS, we often just use
visual back trailing because it is a bit better at following each turn on a
foot path. At faster speeds, like on the highway or on the water, the
Navigate Trail and Backtrack Trail commands are handy.

Visual Trailing
1. On the Map Page, zoom (

ZIN

or

ZOUT

) so your trail is visible.

2. Begin moving and watch the Map Page. Walk or steer so your cur-
rent position arrow traces along the trail you have just made.

Tip:

Generally, when using this method, the smaller the zoom range, the
more accurately you will be able to steer along the trail.

Navigate a Trail
The following figures illustrate the menu sequence for navigating a trail.

1. Press

MENU

|

MENU

|

↓ to

M

Y

T

RAILS

|

ENT

.

2. Press

↓ to enter the Saved Trail list, then use ↑ ↓ to select the de-

sired Trail Name|

ENT

.

3. Press

↓ → to

N

AVIGATE

|

ENT

. Press

↓|

N

AVIGATE

|

ENT

.

The unit begins showing navigation information along the trail.

This manual is related to the following products: