Panasonic AV-UHS500 12G-SDI/HDMI UHD 4K Compact Live Switcher - Manual (Page 28)

28
Preparations
Basic menu operations
This section describes the basic operations of the menus which are displayed on the built-in display.
For the menu configuration, refer to “Setting menu table”.
Menu configuration and operations
1
Press the [MENU MODE] button to show the menu on the built-in display.
 Refer to “Display area”.
2
Select the menu for each function using the menu selection buttons (MENU) that corresponds to the
function concerned.
Each time the button is pressed, the menu of the function displayed at the top of the button and the menu of the function
displayed at the bottom are switched.
The button of a selected menu lights up in amber.
U1 U2
PICT
STORE
DEL VMEM MACRO
EDIT
U3
MENU
MODE
SHOT
MEM
BKGD
PATT
XPT
DSBL
TAKE
ENTER
7
NEW
8
COPY
9
PASTE
4
INS
5
DEL
6
MOD
1
<
2
>
3
REV
0/10
<<
.
>>
C
UNDO
CAM
PMEM
CAM
CONT
EVENT
MEM
KEY
PATT
-/+
PAGE
RE
CALL
MENU
OFF
MENU
HOLD
WFM
VECT
XPT
MV
IN
OUT
CONF
SYS
VMEM
MACRO
SHOT
EVENT
BKGD
CBGD
TIME
CAM
PRJ
SD Card
KEY1
CKEY
KEY2
KEY3
DSK1
DSK2
U4
USER
MENU
MEMORY / WIPE PATTERN / 10 KEY
STILL 1 STILL 2 TRIM IN REC
CLIP 1 CLIP 2 TRIM OUT
<
F1 F2 F3 F4 F5
> REV
<< >> TRIM OFF PLAY
STOP
DISPLAY
U5 U6 U7 U8
2 1
3
3
Use the rotary encoders [F1] to [F5] to select more detailed settings.
[F1] : Turn this rotary encoder to select the sub menu.
[F2] to [F5] : Use (press or turn) these rotary encoders to set the parameters.
For further details, refer to the next page.
Operate here
using [F1].
Operate here
using [F2].
Operate here
using [F3].
Operate here
using [F4].
Operate here
using [F5].
Sub menu
Parameter setting area
p p The Input and Output menus will differ depending on whether optional units have been installed in the unit.