Philips D-Line 55BDL4550D 55" 4K UHD Digital Signage Display - Manual (Page 17)

43BDL4550D_50BDL4550D_55BDL4550D
5
2.2. Input/Output Terminals
HDMI1 IN HDMI2 IN AUDIO OUT RJ45
HDMI OUT DP IN DP OUT DVI-I IN
1 3 4 5
6
8 9 10 7 2
11
13
14
15
16
17
18
12
USB2.0
USB2.0
MICRO SD
RS232
OUT
RS232
IN
IR-IN
IR-OUT
PC LINE IN
1 AC IN
AC power input from the wall outlet.
2 MAIN POWER SWITCH
Switch the main power between On and Off.
3 RJ-45 IN
LAN control function for the use of remote control signal
from control center.
4 AUDIO OUT
Audio output to external AV device.
5 HDMI OUT
HDMI video/audio output.
6 DP IN / 7 DP OUT
DisplayPort video input / output.
8 DVI-I IN
DVI-I video input.
9 HDMI1 IN / 10 HDMI2 IN
HDMI video/audio input.
11 PC LINE IN
Audio input for VGA source (3.5mm stereo phone).
12 IR IN / 13 IR OUT
IR signal input / output for the loop-through function.
NOTES:
• This display’s remote control sensor will stop working
if the jack [ IR IN ] is connected.
• To remotely control your A/V device via this display,
refer to page 15 for IR Pass Through connection.
14 Micro SD card slot
Insert a micro SD card.
15 USB 2.0 PORT / 16 USB 2.0 PORT
Connect your USB storage device and service port.
17 RS232 IN / 18 RS232 OUT
RS232 network input / output for the loop-through
function.