NEC M Series 32" Commercial PCAP Touchscreen Display - Manual (Page 78)

English−74
INPUT MENU
AUTO TURN OFF The HDMI-CEC compatible device goes into standby at the same time as the monitor when the STANDBY
button is pressed on the remote control, or when the
⏻ button is pressed on the monitor.
NOTE: The connected HDMI-CEC compatible device may not go into standby if it is recording.
AUDIO RECEIVER When [ENABLE] is selected, the internal speaker is muted and connected audio equipment with ARC
function outputs the sound.
When [DISABLE] is selected, connected audio equipment with ARC function is muted and the internal
speaker outputs the sound.
NOTE:
• It may take a while to output the sound when changing [AUDIO RECEIVER] settings; but this
is not a failure of the monitor.
SEARCH DEVICE Searches the HDMI input for a connected HDMI-CEC compatible device. If a device is found, the
connected HDMI-CEC compatible device’s type and registered device name are shown.
After detecting HDMI-CEC compatible devices, you can switch the device input by selecting the device.
NOTE:
In some situations, the entire text of the registered name and device type may not fully show.
In this case, please note the device by both the device type and registered name connected to
an input.
SIGNAL FORMAT* 3, * 4 Selects the color space setting and RGB for the HDMI/DisplayPort signal.
NOTE:
Depending on the connected device, colors may not display correctly. In this case, change the
[SIGNAL FORMAT] setting to a selection other than [AUTO].
SIDE BORDER COLOR* 2 Adjusts the color of the borders that show when an image does not fill the entire screen.
Press the + button to make the borders lighter, the level can be increased until the color is white.
Press the – button to make the borders darker, the level can be decreased until the color is black.
RESET Resets all input menu settings back to factory settings except for [INPUT NAME] and [AUTO INPUT
CHANGE].
* 1 : Depending on the device, it may not be detected correctly.
* 2 : Except for Media Player.
* 3 : Except for VGA(RGB) input.
* 4 : YPbPr signal only.
PICTURE
PICTURE MENU
PICTURE MODE
Provides pre-configured picture settings suitable for various environments where this device may be used,
or customize settings to viewer preference.
NATIVE Standard setting.
RETAIL Bright, vivid colors ideal for advertising and branding.
CONFERENCING Lower color temperature and optimized for natural human complexions.
HIGHBRIGHT Maximum backlight brightness with higher color temperature for brighter ambient environments.
TRANSPORTATION Maximum backlight brightness with high contrast to read text under all conditions.
CUSTOM Customizable settings.
BACKLIGHT Adjusts the overall image and background brightness. Press [+] or [–] to adjust.
NOTE:
When [MODE1] or [MODE2] is selected in [AMBIENT LIGHT SENSING] at [ADVANCED], this
function cannot be changed.
BACKLIGHT DIMMING This function is not available.
VIDEO BLACK LEVEL Adjusts the black luminance.
GAMMA Select a monitor gamma correction for best picture quality. Selection depends on the desired usage.
NATIVE Gamma correction is handled by the LCD panel.
2.2 Typical monitor gamma for use with a computer.
2.4 Typical gamma settings for use with videos, such as DVDs and Blu-rays.
S GAMMA Special gamma for certain types of movies. Raises the light parts and lowers the dark parts of the image
(S-Curve).
DICOM SIM. DICOM GSDF curve simulated for LCD type.
NOTE:
Do not use for diagnostic purposes.
PROGRAMMABLE1, 2, 3 A programmable gamma curve can be loaded using optional our software.