Z CAM E2 4K Cinema Camera - Manual (Page 33)

4. Connect to the camera from the iOS device or a computer with that Wi - Fi ID, and
the default password of the Wi - Fi is 12345678 . (not changeable for now)
5.2. Ethernet Connection
There are 2 options to connect the camera to a computer through Ethernet: Direct
Connection or Connection through a Router :
Direct connection
Follow the steps below to set up direct Ethernet connection between the camera and the
computer:
1. Set the Network - ETH. Mode to “Direct” in Connect - Network setting (default).
2. Connect the camera to a computer with an Ethernet cable .