Z CAM E2 4K Cinema Camera - Manual (Page 23)

camera using the HTTP API. (for HTTP API information, contact Z CAM technical
support)
n Serial : The camera will be controlled by UART command from a computer
through USB port.
•
HDMI : Display Info. / OSD L ayout / Resolution / Use EDID
n Display Info : On / Off. Turn on / off camera status on HDMI monitor .
n OSD Layout : Type 1 / Type 2
Type 1: Assist tool as waveform etc . display on the video directly .
Type 2: Add the black frame area to display assist tool .
n Resolution : Auto / Manual (options supported by the HDMI display).
Auto : T he camera will select the most suitable format (resolution & frame rate)
from the HDMI monitor .
Manual: Here will list the formats supported by the HDMI monitor for the user to
select manually .
n Use EDID : Disable / Enable. This setting determines whether the camera
automatically reads the EDID information of the HDMI connected monitor.
2.10. System
• Clear Settings ： Clear all the Settings in the camera and set them to default v alues.
• Format Card ： Format the SD card or the external SSD connected through USB Type
C port (if there is no SD card in the camera). Please note that formatting will erase
ALL DATA in the storage!