Z CAM E2 4K Cinema Camera - Manual (Page 28)

Note: Different resolution and frame rate s ettings correspond to different variable frame
rate range. Refer to 2.2 Record and 2.3 Video .
3.3. Timelapse Video Recording
To active " Timelapse " function, it can record time - lapse video to the memory card, specific
steps are as follows:
1) Set Video - Variable Framerate to "off", otherwise it’s not able to set up t imelapse
parameters.
2) In V ideo – Timelapse setting , set the timelapse interval value ( the interval is the time
between each frame shot) through the FN key ( skip to the next setting item), and UP/
Down button.
The minimum unit of interval time is milliseconds (0.1s), and the range can be set as
0.2s ~ 60s.
3) After the timelapse interval is confirmed , the value will be displayed in the menu
"Timelapse", and the camera icon will be displayed in timelpase recording mode on
the standby.
4) Set other video parameters, except the "Variable Framerate" can not be opened, the
rest is the same as normal recording video.
5) P ress "record" button and the camera will start recording. The recording time shown