Instructions for use – Creality Halot-One Resin 3D Printer User Manual
Page 3
Instructions for Use
Do not use this printer by methods or operations that are not described in this manual, otherwise it may result in accidental injury or property damage.
Do not place this printer near flammable materials, explosive materials or high heat sources. Please place this printer in a ventilated, cool and low-dust environment.
Do not place this printer in a vibrating or any other unstable environment, as the printing quality will be compromised when the printer shakes.
Please use the filament recommended by the manufacturer, otherwise the printer may be damaged.
Please use the power cord provided with the printer and do not use the power cord of other products. The power plug must be plugged into a three-hole socket with a ground wire.
Do not open the printer cover while the printer is in operation, otherwise the printing process may be interrupted.
Do not wear cotton gloves while operating the printer, otherwise the moving parts may cause accidental injury including cuts and lacerations.
1
2
3
4
5
6
7
8
9
10
12
11
Please regularly clean the printer body with a dry cloth while the power is off, and wipe off dust, sticky printing materials, and foreign objects on the guide rails.
Children under the age of 10 must not use this printer without adult supervision in order to avoid accidental injury.
Warning: Do not plug or unplug the power cable while the printer is turned on.
Users should abide by the laws and regulations of the corresponding country and region where the equipment is located (place of use), abide by professional ethics, and pay
attention to safety obligations. The use of our products or equipment for any illegal purpose is strictly prohibited. Our company is not responsible for the relevant legal
responsibilities of any violators.
After the printing is complete, please wear gloves and wait for a while before removing the printing platform. Use tools to remove the model from the platform, and do not touch
the platform with your bare hands when cleaning it.