Creality Halot-One Resin 3D Printer - Manual (Page 16)

10
12. First Printing
2. Insert the USB drive → select the file
→ press the Start button.
Warning: The printer must not be shaken during the printing process, otherwise the printing quality may be compromised.
USB port
2. Print
1. Generate cxdlp file，and save the file to U disk；
ctb(.ctb) 3D objects
file name
Hide Folder
Save type
preservation cancel
Note: The current interface is for reference only, due to the continuous upgrading of functions, the actual to the official website
of the latest firmware Ul as the standard.