Creality Halot-One Resin 3D Printer - Manual (Page 20)

16. Troubleshooting
14
Workflow
Start
Yes/No
Yes/No
Is the original
spot exceeded?
Yes/No
Yes/No
Does the
Z-axis motor
work properly?
Z-Axis Motor
Does the Z-axis
motor rotate?
Complete
Is the screen lit?
Print via the
memory card?
Diagnostics Cause of Failure Solution Feedback
Yes
Yes No No
No
No
Is the file
recognized?
Does the printer
work properly
using other files?
USB Drive
1.Clean the USB drive.
2.Format the USB drive.
3.Use another USB drive.
1. Re-level the platform.
1. Reconnect the cables.
1. Replace the screen.
1. Fasten the coupling.
1.Change the model position and re-slice.
2.Repair the model using the repairing software.
1.Reconnect the cables.
2. Check through replacement method.
1.Reconnect the cables.
2.Check through replacement method.
1. Reconnect the cables.
2. Check through replacement method.
Slicing
Axis Motor
Limit Switch
Is the printer
working?
No
No Leveling Result
Issue fixed
Contact after-sales
service to replace
damaged parts
Contact after-sales
service if the cause
of failure is not identified
Coupling
No
No
Yes Yes
No Are the cables
properly connected?
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Return to the
original spot?
Does the print
screen fit tightly?