Messages on the unit’s display – Panasonic DP-UB9000 HDR UHD 4K Multi-Region Network Blu-ray Disc Player User Manual
Page 42
- 42 -
F99
h
The unit fails to operate properly. Press [
Í
/I]
on the main unit for 3 seconds to switch the
unit to standby, then switch back on.
NET
h
While connecting to a network.
NO PLAY
h
There is a viewing restriction on a BD-Video
or DVD-Video. (
h
A DVD-Video disc with an incompatible color
encoding system or region code is inserted.
NO READ
h
The media is dirty or badly scratched. The
unit cannot play.
REMOVE
h
The USB device is drawing too much power.
Remove the USB device.
SET CODE
∏
(“
” stands for a number.)
h
The remote control and this unit are using
different codes. Change the code on the
remote control.
Press and hold
[OK] and the
indicated number
button at the same time for more than
5 seconds.
U59
h
Temperature of this unit is hot and the unit
switches to standby for safety reasons.
Wait for about 30 minutes.
Install or place this unit with good ventilation.
START
h
A firmware update will start. Please do not
turn off the unit.
UPDATE
/5
(“
” stands for a number.)
h
A firmware update is in progress.
Please do not turn off the unit.
FINISH
h
The firmware update is complete.
Messages on the unit’s
display