Panasonic DP-UB9000 HDR UHD 4K Multi-Region Network Blu-ray Disc Player User Manual
Page 12
- 12 -
(Audio is not output from HDMI OUT terminal.)
BALANCED terminals
(Audio is not output from HDMI OUT terminal.)
AUDIO OUT terminals
Connect terminals of the same color.
(Audio is not output from HDMI OUT terminal.)
Enjoying audio with an amplifier connected to the DIGITAL AUDIO OUT/Analog AUDIO OUT
terminals
Setting
Set the following items in the Setup menu (
≥
Set “HDMI(VIDEO) Output Mode” to “Auto ( Video Only / Video+Audio )”. (
≥
Set “HDMI(AUDIO) Output Mode” to “Audio Only”. (
≥
To enjoy audio with an amplifier connected to the OPTICAL/COAXIAL terminal or 2ch AUDIO OUT
terminals:
Set “Audio Output” to “Off” in “Advanced Settings”. (
≥
To enjoy audio with an amplifier connected to the 7.1ch AUDIO OUT terminals:
Set “Analog Multi Channel” to “On”. (
OPTICAL/COAXIAL (DIGITAL AUDIO OUT)
2ch AUDIO OUT (Analog AUDIO OUT)
OPTICAL IN
COAXIAL IN
Optical digital cable
Amplifier/receiver
OR
Coaxial cable
AUDIO IN
(BALANCED)
R
L
Amplifier/receiver
Match the polarities and
insert.
≥
Do not insert anything
other than balanced
cables. Doing so may
cause malfunction.
Balanced cable
Connect Balanced
cables to terminals
corresponding to
the terminals you
have connected.
AUDIO IN
L
R
Audio cable
Amplifier/receiver