Reference, Setup menu, Is set to “auto” or “4k – Panasonic DP-UB9000 HDR UHD 4K Multi-Region Network Blu-ray Disc Player User Manual
Page 30: Utput, Hdmi
- 30 -
Reference
Setup menu
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
1
Press [HOME].
2
Select “Setup”.
3
Select “Player Settings”.
4
Select an item and change the settings.
To exit the screen
Press [HOME].
∫
Resolution
The items supported by the connected devices
are indicated on the screen as “*”. When any item
without “*” is selected, the images may be
distorted.
≥
If “Auto”*
1
is selected, the best suited output
resolution to the connected TV is automatically
selected.
∫
4K60p Output
This unit automatically chooses to output images
in 4K*
2
60p when connected to a 4K/60p
compatible TV.
≥
This item is available only when “Resolution” is
set to “Auto” and “4K”.
≥
This item is not available when “HDMI(AUDIO)
Output Mode” is set to “Video+Audio”.
≥
To connect to a TV that supports 4K/60p (4:4:4/
8 bit) or 4K/60p (4:2:2/12 bit), select “4K/
60p(4:4:4)”.
Images will not be output correctly with an
HDMI cable that does not support 18 Gbps.
≥
To connect to a TV that supports 4K/60p (4:2:0/
8 bit), select “4K/60p(4:2:0)”.
∫
24p Output
Content recorded at 24p*
3
, such as BD-Video
films, is output at 24p when played back.
≥
When this unit is connected to TV compatible
with 4K/24p and “Resolution” is set to “Auto” or
“4K”, images will be output in 4K/24p.
≥
When this unit is connected to a TV compatible
with 1080/24p and “Resolution” is set to “Auto”,
“1080i” or “1080p”, images will be output in
1080/24p.
≥
If images output in 24p are distorted, change
the setting to “Off”.
∫
HDMI(VIDEO) Output Mode
Set whether or not to output audio from the HDMI
VIDEO OUT terminal.
≥
When an amplifier is connected to the HDMI
AUDIO OUT terminal and this menu item is set
to “Auto ( Video Only / Video+Audio )”, the TV
may not output audio. In that case, select
“Video+Audio”.
∫
HDMI(AUDIO) Output Mode
Set whether or not to output images from the
HDMI AUDIO OUT terminal.
≥
It is not possible to output 3D, 4K or HDR
content from the HDMI AUDIO OUT/HDMI
VIDEO OUT terminal when “Video+Audio” is
selected.
∫
Dolby Vision Setting
You can set enable/disable of the Dolby Vision
function.
By changing this setting to “On”, you can use the
Dolby Vision function under the following
conditions:
– A device (TV, etc.) that supports Dolby Vision is
connected (
– A disc that supports Dolby Vision is played
back.
≥
The “Video Settings” setting is disabled while
using the Dolby Vision function. (
≥
If all the conditions below are met, both Dolby
Vision and HDR10+ are enabled. In that case,
playback in HDR10+ format takes precedence.
– The playback media or content is recorded in
both Dolby Vision and HDR10+ formats.
– Both Dolby Vision and HDR10+ are
supported by the connected device (TV, etc.).
– Both this function and “HDR10+ Setting” are
set to “On”.
HDMI
OK
RETURN
Player Settings
System
Ratings
Network
Language
3D
Audio
Video
HDMI
Resolution
Auto
4K60p Output
Off
24p Output
Auto
HDMI(VIDEO) Output Mode
Auto
HDMI(AUDIO) Output Mode
Audio Only
Dolby Vision Setting
Off
HDR10+ Setting
On
Advanced Settings