Audio – Panasonic DP-UB9000 HDR UHD 4K Multi-Region Network Blu-ray Disc Player User Manual
Page 40
- 40 -
Cannot hear the desired audio.
h
Check the connections and the “Digital Audio
Output” settings. (
h
When the unit is connected to an amplifier/
receiver with the 7.1ch AUDIO OUT
terminals, set “Analog Multi Channel”. (
h
To output audio from a device connected with
an HDMI cable, set “Audio Output” to “On” in
the Setup menu. (
h
When connecting this unit to a TV via an
HDMI VIDEO OUT and to an amplifier/
receiver via an HDMI AUDIO OUT, set
“HDMI(VIDEO) Output Mode” to “Auto ( Video
Only / Video+Audio )”. (
Even when gapless playback is performed for
an album or similar group of songs containing
a sound source recorded at a live
performance or concert (a music file
containing songs that are recorded
continuously), the playback is interrupted
between songs.
h
In the following cases, playback is interrupted
between songs:
– When the file contains recordings that differ
from one another in their settings, such as
file format, sampling frequency, and
channel number
– When files of 100 or more songs are
contained in a single folder
The volume of audio output from the analog
AUDIO OUT terminals is too high or too low.
h
Adjust the volume of the analog AUDIO OUT
terminals in “Analog Volume (dB)” in the
Option menu. (
Cannot output audio with a sampling
frequency higher than 192 kHz from the HDMI
AUDIO OUT/OPTICAL/COAXIAL terminal.
h
On this unit, only the analog AUDIO OUT
terminals support output of audio with a
sampling frequency higher than 192 kHz.
Connect to any of the analog AUDIO OUT
terminals to output audio with a sampling
frequency higher than 192 kHz.
There is no sound coming out.
h
To output audio using OPTICAL/COAXIAL
terminal, set “OPTICAL / COAXIAL Down
Sampling” properly. (
h
Refer to “Connecting to an amplifier/receiver”
(
11 - 16) to check the audio output settings
suited to the connections of your device.
In the following cases, audio is not output
from the terminals listed below:
≥
HDMI VIDEO OUT terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and “HDMI(VIDEO)
Output Mode” is set to “Auto ( Video Only /
Video+Audio )” (
– When “Audio Output” in “Advanced
Settings” is set to “Off” (
– While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “OPTICAL / COAXIAL Only”
or “Analog Only” (
– When “Analog Multi Channel” is set to “On”
≥
HDMI AUDIO OUT terminal
– When “Audio Output” in “Advanced
Settings” is set to “Off” (
– While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “OPTICAL / COAXIAL Only”
or “Analog Only” (
– When “Analog Multi Channel” is set to “On”
≥
OPTICAL/COAXIAL terminal
– When a device is connected to the HDMI
AUDIO OUT terminal and “Audio Output” in
“Advanced Settings” is set to “On” (
– While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “HDMI Only” or “Analog Only”
(
≥
2ch AUDIO OUT terminals
– When a device is connected to the HDMI
AUDIO OUT terminal and “Audio Output” in
“Advanced Settings” is set to “On” (
– While playback is being performed with
“Audio Output” in “Settings for High Clarity
Sound” set to “HDMI Only” or “OPTICAL /
COAXIAL Only” (
Audio