Electrolux 63742 VI - Manual (Page 43)

43 Installation
Building-in
This appliance has been designed to be built into
the kitchen furniture.
The recess should have the dimensions shown in
picture A.
When installing the appliance into the kitchen furniture ensure, if possible, the hoses are
placed in either of the two recesses on the back of the appliance. This will help to pre-
vent the hoses from becoming kinked or trapped.
Preparation and assembly of the door
The machine is originally pre-arranged for the assembly of a door opening from
right to left.
In this case it is sufficient to screw in the hinges (1) and the counter-magnet (6)
provided with the appliance, at the right level (Fig. B).
a) Door
The dimensions of the door should be:
- width 595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the height of
the adjacent furniture's base.
b) Hinges
To mount the hinges it is necessary to drill two
holes (dia. 35 mm, depth 12.5-14 mm depending
on the depth of door furniture) on the inner side
of the door. The distance between the holes hobs
fixing centres must be 416 mm.
The distance (B) from upper edge of the door to
the centre of the hole depends on the adjacent
furniture's dimensions.
The required dimensions are given in the picture
C.
The hinges will be fixed to the door by means of
screws for wood (2-Fig. B) supplied with the
appliance.
820 min
600 min.
600
596
41
6
176
, 5
81
8
541 195
490
160
120
90
8
515
165
A
600
4
1 2
3
6
1
2
3
5
7
8
B
35 Ø 12.5-14 depth
16-22
B
C
22+1,5
595-598
41
6
C
132963770_en.qxd 21/07/2008 8.25 Page 43