beautypg.com

Water inlet filter, Emergency emptying out – Electrolux 63742 VI User Manual

Page 30

background image

30

Care and cleaning

replacing the cover, ensure it is securely
retightened so as to stop leaks and young
children being able to remove it.

Water inlet filter

If you notice that the machine is taking
longer to fill, check that the filter in the water inlet hose is not blocked.

1. Turn off the water tap.

2. Unscrew the hose from the tap.

3. Clean the filter in the hose with a stiff brush.

4. Screw the hose back onto the tap.

Emergency emptying out

If the water is not discharged, proceed as
follows to empty out the machine:

1. pull out the plug from the power socket;

2. close the water tap;

3. if necessary, wait until the water has

cooled down;

4. place a bowl on the floor and place the end of the emergency emptying hose

into the bowl. Remove its cap. The water should drain by gravity into the
bowl. When the bowl is full, put the cap back on the hose. Empty the bowl.
Repeat the procedure until water stops flowing out;

5. clean the pump if necessary as previously described;

6. replace the emergency emptying hose in its seat after having plugged it;

7. refit the pump cover.

132963770_en.qxd 21/07/2008 8.25 Page 30