Electrolux 63742 VI - Manual (Page 18)

Selecting the delayed start.
● Select the programme and the required options.
● Select the delay start.
● Depress button 8 : the machine starts its hourly countdown. The programme
will start after the selected delay has expired.
Cancelling the delayed start
● set the washing machine to PAUSE by pressing the button 8 ;
● press button 9 once until the symbol 0’ is displayed;
● press the button 8 again to start the programme.
Important!
● The selected delay can be changed only after selecting the washing programme
again.
The button 9 can not be selected with DRAIN programme .
Select an additional rinse
This appliance is designed for saving water. However, for people with a very
delicate skin (allergic to detergents) it may be necessary to rinse the laundry
using an extra quantity of water (extra rinse).
Press buttons 2 and 3 simultaneously for some seconds: the pilot light 10.3
comes on. This function stays permanently on. To remove it press the same but-
tons again until the pilot light
10.3 goes off.
Altering an option or a running programme
It is possible to change some options before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
button
8 . Changing a running programme is possible only by resetting it. Turn
the programme selector dial to O and then to the new programme position.
Start the new programme by pressing the button 8 again. The washing water in
the tub will not be emptied out.
Interrupting a programme
Press button 8 to interrupt a programme which is running, the corresponding
light starts blinking. Press the button again to restart the programme.
18 Use
132963770_en.qxd 21/07/2008 8.25 Page 18