Extron electronic PA 300 - Manual (Page 6)

PA 300 Peaking Amplifi er • Introduction
Introduction
PA 300
1-2
2
Chapter Two
Installation and Operation
Installation Overview
Mounting the PA 300
Front Panel Features
Rear Panel Features
Cabling
About this Manual
This manual contains information about the Extron PA 300
peaking amplifi er, and includes information on how to install,
operate and troubleshoot the unit.
About the PA 300
The PA 300 is an ultra high performance RGB peaking amplifi er
capable of driving a 1600 x 1200 resolution computer signal over
600 feet using Extron Mini HR cables, or 1000 feet using Extron
RG6 cable. The PA 300 is compatible with both RGB and HDTV
component signals.
The PA 300 has one gain potentiometer and two peaking
potentiometers on the front panel. On the rear panel, the
PA 300 provides fi ve BNCs for RGBHV output and fi ve BNCs
for RGBHV input. The unit restores the sync signals, but does
not process them for format, polarity, or delay.
The PA 300 is housed in a 1U, half rack, 6" deep, 2-piece
enclosure, and uses an internal power supply.
Features
Bandwidth — has 350 MHz (-3 dB) RGB video bandwidth, fully
loaded.
Gain and peaking control — allows for optimized output
compensation for various cable lengths and applications.
Light and compact metal enclosure — provides a 1U, half rack,
6" deep, 2-piece enclosure.
Versatile mounting options — can be set on a table; mounted
on a rack shelf; or mounted through or under a desk,
podium, or tabletop.
Global accessibility — provides a universal internal power
supply allowing for worldwide usability.