beautypg.com

Entering user modes, Energy saver feature – HP Z38c 37.5" 21:9 Curved IPS Monitor (Smart Buy) User Manual

Page 29

background image

Preset

Timing name

Pixel format

Horz freq (kHz)

Vert freq (Hz)

5

576i

720 × 576

15.625

50.000

6

576p

720 × 576

31.250

50.000

7

720p50

1280 × 720

37.500

50.000

8

1080i50

1920 × 1080

28.125

50.000

9

1080p60

1920 × 1080

67.500

60.000

10

1080p50

1920 × 1080

56.250

50.000

Entering user modes

The video controller signal may occasionally call for a mode that is not preset under the following conditions:

You are not using a standard graphics adapter.

You are not using a preset mode.

If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display.

Your changes can be made to any or all of these modes and saved in memory. The monitor automatically

stores the new setting, and then recognizes the new mode just as it does a preset mode. In addition to the

factory preset modes, there are at least 10 user modes that can be entered and stored.

Energy saver feature

The monitor supports a reduced power state. The reduced power state will be entered into if the monitor

detects the absence of either the horizontal sync signal or the vertical sync signal. Upon detecting the

absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light turns

amber. When the monitor is in the reduced power state, the monitor will utilize <0.5 watts of power. There is

a brief warm-up period before the monitor will return to its normal operating state.
Refer to the computer manual for instructions on setting the energy saver mode (sometimes called power

management feature).

NOTE:

The above energy saver feature works only when the monitor is connected to a computer that has

energy saver features.

By selecting the settings in the monitor's Sleep Timer utility, you can also program the monitor to enter into

the reduced power state at a predetermined time. When the monitor's Sleep Timer utility causes the monitor

to enter the reduced power state, the power light blinks amber.

Energy saver feature

23