Install the i/o cover – BenQ DesignVue PD2705UA 27" 4K HDR Monitor with Ergo Stand User Manual

Page 34

Put the cable management cover back.

7. Install the I/O cover.

Gently lift the display up and extend it to the

maximum extended position. Then tilt the monitor

to install/remove the I/O cover easily.
Align the I/O cover with the holes on the back of the

monitor, and press the sides and the bottom of the

cover against the holes to lock it into place. Push

from the bottom of the cover and check if the it has

been installed properly.

You might want to adjust the monitor stand height.

See

for

more information.